Structural Analysis of Human IgE Monoclonal Antibody Epitopes on Dust Mite Allergen Der p 2.

BACKGROUND: Human IgE monoclonal antibodies (hIgE mAb) against major mite allergen Der p 2 developed using human hybridoma technology, were used for IgE epitope mapping and analysis of epitopes associated with the human IgE repertoire. OBJECTIVE: To elucidate the new hIgE mAb 4C8 epitope on Der p 2 and compare it to the hIgE mAb 2F10 epitope in the context of the allergenic structure of Der p 2. METHODS: X-ray crystallography was utilized to determine the epitope of anti-Der p 2 hIgE mAb 4C8. Epitope mutants created by targeted mutagenesis were analyzed by immunoassays and in vivo using a human FcεRIα-transgenic mouse model of passive systemic anaphylaxis. RESULTS: The structure of recombinant Der p 2 with hIgE mAb 4C8 Fab was determined at 3.05 Å. The newly identified epitope region does not overlap with the hIgE mAb 2F10 epitope or the region recognized by three overlapping hIgE mAb (1B8, 5D10, and 2G1). Compared to wildtype Der p 2, single or double 4C8 and 2F10 epitope mutants bound less IgE antibodies from allergic patients by as much as 93%. Human FcεRIα-transgenic mice sensitized by hIgE mAb, which were susceptible to anaphylaxis when challenged with wildtype Der p 2, could no longer cross-link FcεRI to induce anaphylaxis when challenged with the epitope mutants. CONCLUSION: These data establish the structural basis of allergenicity of two hIgE mAb non-overlapping epitopes on Der p 2, which appear to make important contributions to the hIgE repertoire against Der p 2 and provide molecular targets for future design of allergy therapeutics.

Inhaled Volatiles for Status Asthmaticus, Epilepsy, and Difficult Sedation in Adult ICU and PICU: A Systematic Review.

OBJECTIVES: Inhaled volatile anesthetics support management of status asthmaticus (SA), status epilepticus (SE), and difficult sedation (DS). This study aimed to evaluate the effectiveness, safety, and feasibility of using inhaled anesthetics for SA, SE, and DS in adult ICU and PICU patients. DATA SOURCES: MEDLINE, Cochrane Central Register of Controlled Trials, and Embase. STUDY SELECTION: Primary literature search that reported the use of inhaled anesthetics in ventilated patients with SA, SE, and DS from 1970 to 2021. DATA EXTRACTION: Study data points were extracted by two authors independently. Quality assessment was performed using the Joanna Briggs Institute appraisal tool for case studies/series, Newcastle criteria for cohort/case-control studies, and risk-of-bias framework for clinical trials. DATA SYNTHESIS: Primary outcome was volatile efficacy in improving predefined clinical or physiologic endpoints. Secondary outcomes were adverse events and delivery logistics. From 4281 screened studies, the number of included studies/patients across diagnoses and patient groups were: SA (adult: 38/121, pediatric: 28/142), SE (adult: 18/37, pediatric: 5/10), and DS (adult: 21/355, pediatric: 10/90). Quality of evidence was low, consisting mainly of case reports and series. Clinical and physiologic improvement was seen within 1-2 hours of initiating volatiles, with variable efficacy across diagnoses and patient groups: SA (adult: 89-95%, pediatric: 80-97%), SE (adults: 54-100%, pediatric: 60-100%), and DS (adults: 60-90%, pediatric: 62-90%). Most common adverse events were cardiovascular, that is, hypotension and arrhythmias. Inhaled sedatives were commonly delivered using anesthesia machines for SA/SE and miniature vaporizers for DS. Few (10%) of studies reported required non-ICU personnel, and only 16% had ICU volatile delivery protocol. CONCLUSIONS: Volatile anesthetics may provide effective treatment in patients with SA, SE, and DS scenarios but the quality of evidence is low. Higher-quality powered prospective studies of the efficacy and safety of using volatile anesthetics to manage SA, SE, and DS patients are required. Education regarding inhaled anesthetics and the protocolization of their use is needed.

Precision engineering for localization, validation, and modification of allergenic epitopes.

The allergen-IgE interaction is essential for the genesis of allergic responses, yet investigation of the molecular basis of these interactions is in its infancy. Precision engineering has unveiled the molecular features of allergen-antibody interactions at the atomic level. High-resolution technologies, including x-ray crystallography, nuclear magnetic resonance spectroscopy, and cryo-electron microscopy, determine allergen-antibody structures. X-ray crystallography of an allergen-antibody complex localizes in detail amino acid residues and interactions that define the epitope-paratope interface. Multiple structures involving murine IgG mAbs have recently been resolved. The number of amino acids forming the epitope broadly correlates with the epitope area. The production of human IgE mAbs from B cells of allergic subjects is an exciting recent development that has for the first time enabled an actual IgE epitope to be defined. The biologic activity of defined IgE epitopes can be validated in vivo in animal models or by measuring mediator release from engineered basophilic cell lines. Finally, gene-editing approaches using the Clustered Regularly Interspaced Short Palindromic Repeats technology to either remove allergen genes or make targeted epitope engineering at the source are on the horizon. This review presents an overview of the identification and validation of allergenic epitopes by precision engineering.

Toward a common standard for data and specimen provenance in life sciences.

Open and practical exchange, dissemination, and reuse of specimens and data have become a fundamental requirement for life sciences research. The quality of the data obtained and thus the findings and knowledge derived is thus significantly influenced by the quality of the samples, the experimental methods, and the data analysis. Therefore, a comprehensive and precise documentation of the pre-analytical conditions, the analytical procedures, and the data processing are essential to be able to assess the validity of the research results. With the increasing importance of the exchange, reuse, and sharing of data and samples, procedures are required that enable cross-organizational documentation, traceability, and non-repudiation. At present, this information on the provenance of samples and data is mostly either sparse, incomplete, or incoherent. Since there is no uniform framework, this information is usually only provided within the organization and not interoperably. At the same time, the collection and sharing of biological and environmental specimens increasingly require definition and documentation of benefit sharing and compliance to regulatory requirements rather than consideration of pure scientific needs. In this publication, we present an ongoing standardization effort to provide trustworthy machine-actionable documentation of the data lineage and specimens. We would like to invite experts from the biotechnology and biomedical fields to further contribute to the standard.

Unique allergen-specific human IgE monoclonal antibodies derived from patients with allergic disease.

Introduction: Allergic reactions are mediated by human IgE antibodies that bind to and cross-link allergen molecules. The sites on allergens that are recognized by IgE antibodies have been difficult to investigate because of the paucity of IgE antibodies in a human serum. Here, we report the production of unique human IgE monoclonal antibodies to major inhaled allergens and food allergens that can be produced at scale in perpetuity. Materials and methods: The IgE antibodies were derived from peripheral blood mononuclear cells of symptomatic allergic patients, mostly children aged 3-18 years, using hybridoma fusion technology. Total IgE and allergen-specific IgE was measured by ImmunoCAP. Their specificity was confirmed through ELISA and immunoblotting. Allergenic potency measurements were determined by ImmunoCAP inhibition. Biological activity was determined in vitro by comparing ß-hexosaminidase release from a humanized rat basophilic cell line. Results: Human IgE monoclonal antibodies (n = 33) were derived from 17 allergic patients with symptoms of allergic rhinitis, asthma, atopic dermatitis, food allergy, eosinophilic esophagitis, or red meat allergy. The antibodies were specific for five inhaled allergens, nine food allergens, and alpha-gal and had high levels of IgE (53,450-1,702,500 kU/L) with ratios of specific IgE to total IgE ranging from <0.01 to 1.39. Sigmoidal allergen binding curves were obtained through ELISA, with low limits of detection (<1 kU/L). Allergen specificity was confirmed through immunoblotting. Pairs of IgE monoclonal antibodies to Ara h 6 were identified that cross-linked after allergen stimulation and induced release of significant levels of ß-hexosaminidase (35%-80%) from a humanized rat basophilic cell line. Conclusions: Human IgE monoclonal antibodies are unique antibody molecules with potential applications in allergy diagnosis, allergen standardization, and identification of allergenic epitopes for the development of allergy therapeutics. The IgE antibody probes will enable the unequivocal localization and validation of allergenic epitopes.

Corrigendum: Biological activity of human IgE monoclonal antibodies targeting Der p 2, Fel d 1, Ara h 2 in basophil mediator release assays.

[This corrects the article DOI: 10.3389/fimmu.2023.1155613.].

Proteomics-Based Approach for Detailing the Allergenic Profile of Cannabis Chemotypes.

Allergic sensitization to cannabis is an emerging public health concern and is difficult to clinically establish owing to lack of standardized diagnostic approaches. Attempts to develop diagnostic tools were largely hampered by the Schedule I restrictions on cannabis, which limited accessibility for research. Recently, however, hemp was removed from the classified list, and increased accessibility to hemp allows for the evaluation of its practical clinical value for allergy diagnosis. We hypothesized that the proteomic profile is preserved across different cannabis chemotypes and that hemp would be an ideal source of plant material for clinical testing. Using a proteomics-based approach, we examined whether distinct varieties of cannabis plant contain relevant allergens of cannabis. Cannabis extracts were generated from high tetrahydrocannabinol variety (Mx), high cannabidiol variety (V1-19) and mixed profile variety (B5) using a Plant Total Protein Extraction Kit. Hemp extracts were generated using other standardized methods. Protein samples were subjected to nanoscale tandem mass spectrometry. Acquired peptides sequences were examined against the Cannabis sativa database to establish protein identity. Non-specific lipid transfer protein (Can s 3) level was measured using a recently developed ELISA 2.0 assay. Proteomic analysis identified 49 distinct potential allergens in protein extracts from all chemotypes. Most importantly, clinically relevant and validated allergens, such as profilin (Can s 2), Can s 3 and Bet v 1-domain-containing protein 10 (Can s 5), were identified in all chemotypes at label-free quantification (LFP) intensities > 106. However, the oxygen evolving enhancer protein 2 (Can s 4) was not detected in any of the protein samples. Similarly, Can s 2, Can s 3 and Can s 5 peptides were also detected in hemp protein extracts. The validation of these findings using the ELISA 2.0 assay indicated that hemp extract contains 30-37 ng of Can s 3 allergen per µg of total protein. Our proteomic studies indicate that relevant cannabis allergens are consistently expressed across distinct cannabis chemotypes. Further, hemp may serve as an ideal practical substitute for clinical testing, since it expresses most allergens relevant to cannabis sensitization, including the validated major allergen Can s 3.

Indoor Environmental Exposures and Their Relationship to Allergic Diseases.

Cockroach, dust mite, cat, dog, mouse, and molds are major indoor allergens that have been associated with the development of allergic diseases and disease morbidity in allergen-sensitized individuals. Physical characteristics, such as allergen particle size, hydrophobicity, and charge, can determine an allergen's propensity to become airborne, location of respiratory tract penetration, and ability to elicit IgE responses in genetically predisposed individuals. Standardization and recent advancements in indoor allergen assessment serve to identify sources and distribution of allergens in a patient's home and public environment, inform public policy, and monitor the efficacy of allergen avoidance and therapeutics. Allergen exposure interventions have yielded mixed results with current US and international asthma guidelines differing on recommendations. A pragmatic, patient-centered approach to allergen avoidance includes: (1) tailoring intervention to the patient's sensitization and exposure status, (2) using a rigorous multifaceted intervention strategy to reduce allergen exposure as much as possible, and (3) beginning the intervention as soon as the patient is diagnosed. Further research into the risks/benefits of early allergen exposure, rapid and affordable in-home allergen assessment, and best practices for environmental control measures for asthma is needed.

Biological activity of human IgE monoclonal antibodies targeting Der p 2, Fel d 1, Ara h 2 in basophil mediator release assays.

Background: Human Immunoglobulin E monoclonal antibodies (hIgE mAb) are unique tools for investigating IgE responses. Here, the biological activity of hIgE mAb, derived from immortalized B cells harvested from the blood of allergic donors, targeting three allergens (Der p 2, Fel d 1 and Ara h 2) was investigated. Methods: Three Der p 2-, three Fel d 1- and five Ara h 2-specific hIgE mAb produced by human B cell hybridomas, were combined in pairs and used to passively sensitize humanized rat basophilic leukemia cells and compared with sensitization using serum pools. Sensitized cells were stimulated with corresponding allergens (recombinant or purified), allergen extracts or structural homologs, having 40-88% sequence similarity, and compared for mediator (ß-hexosaminidase) release. Results: One, two and eight pairs of Der p 2-, Fel d 1- and Ara h 2-specific hIgE mAb, respectively, produced significant mediator release (>50%). A minimum hIgE mAb concentration of 15-30 kU/L and a minimum antigen concentration between 0.01-0.1 µg/mL were sufficient to induce a pronounced mediator release. Individual sensitization with one Ara h 2-specific hIgE mAb was able to induce crosslinking independently of a second specific hIgE mAb. Der p 2- and Ara h 2-specific mAb showed a high allergen specificity when compared to homologs. Mediator release from cells sensitized with hIgE mAb was comparable to serum sensitization. Conclusion: The biological activity of hIgE mAb reported here provides the foundation for novel methods of standardization and quality control of allergen products and for mechanistic studies of IgE-mediated allergic diseases, using hIgE mAb.

EAACI Molecular Allergology User's Guide 2.0.

Since the discovery of immunoglobulin E (IgE) as a mediator of allergic diseases in 1967, our knowledge about the immunological mechanisms of IgE-mediated allergies has remarkably increased. In addition to understanding the immune response and clinical symptoms, allergy diagnosis and management depend strongly on the precise identification of the elicitors of the IgE-mediated allergic reaction. In the past four decades, innovations in bioscience and technology have facilitated the identification and production of well-defined, highly pure molecules for component-resolved diagnosis (CRD), allowing a personalized diagnosis and management of the allergic disease for individual patients. The first edition of the "EAACI Molecular Allergology User's Guide" (MAUG) in 2016 rapidly became a key reference for clinicians, scientists, and interested readers with a background in allergology, immunology, biology, and medicine. Nevertheless, the field of molecular allergology is moving fast, and after 6 years, a new EAACI Taskforce was established to provide an updated document. The Molecular Allergology User's Guide 2.0 summarizes state-of-the-art information on allergen molecules, their clinical relevance, and their application in diagnostic algorithms for clinical practice. It is designed for both, clinicians and scientists, guiding health care professionals through the overwhelming list of different allergen molecules available for testing. Further, it provides diagnostic algorithms on the clinical relevance of allergenic molecules and gives an overview of their biology, the basic mechanisms of test formats, and the application of tests to measure allergen exposure.

Predictors of hospital-acquired pressure injuries in patients with complete spinal cord injury: a retrospective case-control study.

BACKGROUND: Despite current best practices, pressure injuries (PI) remain a devastating and prevalent hospital-acquired complication for patients with acute traumatic spinal cord injuries (SCIs). This study examined associations between risk factors for PI development in patients with complete SCI, such as norepinephrine dose and duration, and other demographic factors or lesion characteristics. METHODS: This case-control study included adults with acute complete SCIs ASIA-A, who were admitted to a level-one trauma center between 2014-18. A retrospective review was implement using data on patient and injury characteristics, including age, gender, level of SCI (cervical vs. thoracic), Injury Severity Score (ISS), length of stay (LOS) and mortality; presence/absence of PI during their acute hospital stay; and treatment factors such as spinal surgery, mean arterial pressure (MAP) targets, and vasopressor treatment. Multivariable logistic regression evaluated associations with PI. RESULTS: Eighty-two out of 103 eligible patients had complete data, and 30 (37%) developed PIs. Patient and injury characteristics, including age (Mean: 50.6; SD:21.3), location of SCI (48 cervical, 59%) and ISS (Mean 33.1; SD:11.8), did not differ between PI and non-PI groups. Logistic regression analysis revealed that male gender (OR:34.1; CI95:2.3-506.5, p = 0.010) and increased LOS (log-transformed; OR:20.5, CI95:2.8-149.9, p = 0.003) were associated with increased risk of PI. Having an order for a MAP > 80mmg (OR:0.05; CI95:0.01-0.30, p = 0.001) was associated with a reduced risk of PI. There were no significant associations between PI and duration of norepinephrine treatment. CONCLUSIONS: Norepinephrine treatment parameters were not associated with development of PI, suggesting that MAP targets should be a focus for future investigations for SCI management. Increasing LOS should highlight the need for high-risk PI prevention and vigilance.

Human Monoclonal IgE Antibodies-a Major Milestone in Allergy.

PURPOSE OF REVIEW: Bound to its high affinity receptor on mast cells and basophils, the IgE antibody molecule plays an integral role in the allergic reaction. Through interactions with the allergen, it provides the sensitivity and specificity parameters for cell activation and mediator release that produce allergic symptoms. Advancements in human hybridoma technologies allow for the generation and molecular definition of naturally occurring allergen-specific human IgE monoclonal antibodies. RECENT FINDINGS: A high-resolution structure of dust mite allergen Der p 2 in complex with Fab of the human IgE mAb 2F10 was recently determined using X-ray crystallography. The structure reveals the fine molecular details of IgE 2F10 binding its 750 Å2 conformational epitope on Der p 2. This review provides an overview of this major milestone in allergy, the first atomic resolution structure of an authentic human IgE epitope. The molecular insights that IgE epitopes provide will allow for structure-based design approaches to the development of novel diagnostics, antibody therapeutics, and immunotherapies.

Manufacturing processes of peanut (Arachis hypogaea) allergen powder-dnfp.

Background: Important components of drug safety, efficacy, and acceptability involve manufacturing and testing of the drug substance and drug product. Peanut flour sourcing/processing and manufacturing processes may affect final drug product allergen potency and contamination level, possibly impacting drug safety, quality, and efficacy. We describe key steps in the manufacturing processes of peanut (Arachis hypogaea) allergen powder-dnfp (PTAH; Palforzia®), a drug used in oral immunotherapy (OIT) for the treatment of peanut allergy. Methods: Established criteria for source material must be met for manufacturing PTAH drug product. Degree of roasting was determined with a Hunter colorimeter. Protein/allergen content, identity, potency, safety, and quality of each batch of PTAH drug substance were assessed with a combustion analyzer, allergen-specific Western blot (immunoblotting), ELISA, and HPLC. Contaminants (ie, aflatoxin) were measured by UPLC. Results: Roasting degree beyond "light roast" was associated with variable degrees of protein allergen degradation, or potentially aggregation. Relative potency and amounts of protein allergens showed variability due in part to seasonal/manufacturing variability. Proportion of lots not meeting aflatoxin limits has increased in recent years. Up to 60% of peanut flour source material failed to meet screening selection acceptance criteria for proceeding to drug substance testing, mostly because of failure to meet potency acceptance criteria. Other lots were rejected due to safety (ie, aflatoxin) and quality. Influence of potency variation, within specification parameters, on safety/tolerability observed in trials was considered low, in part due to stringent controls placed at each step of manufacturing. Conclusions: Extensive variability in allergen potency is a critical issue during immunotherapy, particularly during OIT initial dose escalation and up-dosing, as it may result in lack of efficacy or avoidable adverse allergic reactions. Based on EU and US regulatory requirements, the production of PTAH includes manufacturing controls to ensure drug product safety, potency, and quality. For example, although PTAH contains all peanut allergens, each lot has met strict criteria ensuring consistent allergenic potency of Ara h 1, Ara h 2, and Ara h 6. The rigor of PTAH's manufacturing process ensures reliable dose consistency and stability throughout its shelf life.

Human IgE monoclonal antibody recognition of mite allergen Der p 2 defines structural basis of an epitope for IgE cross-linking and anaphylaxis in vivo.

Immunoglobulin E (IgE) antibody is a critical effector molecule for adaptive allergen-induced immune responses, which affect up to 40% of the population worldwide. Allergens are usually innocuous molecules but induce IgE antibody production in allergic subjects. Allergen cross-linking of IgE bound to its high affinity receptor (FcεRI) on mast cells and basophils triggers release of histamine and other mediators that cause allergic symptoms. Little is known about the direct allergen-IgE antibody interaction due to the polyclonal nature of serum IgE and the low frequency of IgE-producing B cells in blood. Here, we report the X-ray crystal structure of a house dust mite allergen, Der p 2, in complex with Fab of a human IgE monoclonal antibody (mAb) isolated by hybridoma technology using human B cells from an allergic subject. This IgE mAb, 2F10, has the correct pairing of heavy and light chains as it occurs in vivo. Key amino acids forming the IgE epitope on Der p 2 were identified. Mutation of these residues ablated their functional ability to cross-link IgE in a mouse model of passive systemic anaphylaxis. These analyses revealed an important conformational epitope associated with the IgE antibody repertoire to a major mite allergen.

Developing a Long COVID Phenotype for Postacute COVID-19 in a National Primary Care Sentinel Cohort: Observational Retrospective Database Analysis.

BACKGROUND: Following COVID-19, up to 40% of people have ongoing health problems, referred to as postacute COVID-19 or long COVID (LC). LC varies from a single persisting symptom to a complex multisystem disease. Research has flagged that this condition is underrecorded in primary care records, and seeks to better define its clinical characteristics and management. Phenotypes provide a standard method for case definition and identification from routine data and are usually machine-processable. An LC phenotype can underpin research into this condition. OBJECTIVE: This study aims to develop a phenotype for LC to inform the epidemiology and future research into this condition. We compared clinical symptoms in people with LC before and after their index infection, recorded from March 1, 2020, to April 1, 2021. We also compared people recorded as having acute infection with those with LC who were hospitalized and those who were not. METHODS: We used data from the Primary Care Sentinel Cohort (PCSC) of the Oxford Royal College of General Practitioners (RCGP) Research and Surveillance Centre (RSC) database. This network was recruited to be nationally representative of the English population. We developed an LC phenotype using our established 3-step ontological method: (1) ontological step (defining the reasoning process underpinning the phenotype, (2) coding step (exploring what clinical terms are available, and (3) logical extract model (testing performance). We created a version of this phenotype using Protégé in the ontology web language for BioPortal and using PhenoFlow. Next, we used the phenotype to compare people with LC (1) with regard to their symptoms in the year prior to acquiring COVID-19 and (2) with people with acute COVID-19. We also compared hospitalized people with LC with those not hospitalized. We compared sociodemographic details, comorbidities, and Office of National Statistics-defined LC symptoms between groups. We used descriptive statistics and logistic regression. RESULTS: The long-COVID phenotype differentiated people hospitalized with LC from people who were not and where no index infection was identified. The PCSC (N=7.4 million) includes 428,479 patients with acute COVID-19 diagnosis confirmed by a laboratory test and 10,772 patients with clinically diagnosed COVID-19. A total of 7471 (1.74%, 95% CI 1.70-1.78) people were coded as having LC, 1009 (13.5%, 95% CI 12.7-14.3) had a hospital admission related to acute COVID-19, and 6462 (86.5%, 95% CI 85.7-87.3) were not hospitalized, of whom 2728 (42.2%) had no COVID-19 index date recorded. In addition, 1009 (13.5%, 95% CI 12.73-14.28) people with LC were hospitalized compared to 17,993 (4.5%, 95% CI 4.48-4.61; P<.001) with uncomplicated COVID-19. CONCLUSIONS: Our LC phenotype enables the identification of individuals with the condition in routine data sets, facilitating their comparison with unaffected people through retrospective research. This phenotype and study protocol to explore its face validity contributes to a better understanding of LC.